ultra thin AWG36 K-type beaded wire probe

By A Mystery Man Writer

Description

We sell a range of thin and ultra thin K-type thermocouples AWG36 with PFA plastic insulation
Ultra Thin K-Type Thermocouple AWG36 for Digital Thermometer - 1 thermocouple 0.07 inch or 0.7 mm diameter with Teflon PFA insulation - -320 to 500°F (-200 to 260°C) This is a flexible K-type Thermocouple for use in a wide range of medium temperature applications, such as environmental monitoring, ovens, wood kilns, laboratory and science use. K-type thermocouples are also used in low and ultra low temperature application and cryogenics. The probe is made from AWG 36 Gauge K-type thermocouple wire and is rated for continuous use at from -320 °F up to 500 °F Fahrenheit (or -200 °C to 260 °C) . The K-type thermocouple is about 0.7 mm or 0.027 inch in insulation diameter. This type K Thermocouple Probe is made with a miniature K-type Thermocouple plug and will fit most digital K-type Thermometers. The thermocouple plug contacts are made from Chromel/Alumel compensation metal for highest accuracy measurements. The photos show a 0.5 mm pencil for comparison.This is made to order and may need 2 to 3 days production time Specification: Thermocouple: K-TypeThermocouple Grade: Class 1 (Select Grade) +/- 1.5 °CTemperature Range: Continuous use up to 500 °F or 260 °C ANSI color coded PFA insulation, red = -, yellow = +, outside yellowWire length: approx. 3 ft / 95 cmWire thickness: AWG36 (0.125 mm) diameterProbe thickness with insulation: 0.027 inch (0.7 mm)Miniature K-Type connector

ultra thin AWG36 K-type beaded wire probe

Buy a stranded K-type thermocouple wire for extension wire or thermocouple

GG-K-30-SLE K Type Thermocouple Temperature Line High, 48% OFF

Omega 5TC-GG-K-20-72 Thermocouple Wire, Type K, 20Awg, 2m | Thermocouples

Ultra Thin and Long K-Type Thermocouple AWG36 for Digital Thermometer, - 1 thermocouple 0.07 inch or 0.7 mm diameter with Teflon PFA insulation -,

Ultra Thin K-type Thermocouple AWG36 65 ft

This Type-K beaded thermocouple wire probe is recommended for basic general purpose temperature applications. The TP-01 is color coded according to ANSI thermocouple identification standards. Temperature probe for use with thermometers or multimeters/clamp meters featuring temperature measurement. 0.5 inchH x 0.75 inchW x 0.25 inchD. Yellow/White. Terminated with a standard mini-connector that is color coded according to ANSI standards.