Stencil Brushes & Rollers for Smooth Paint Application
Brushes, rollers and applicators suitable for professionals, artists, and DIY'ers, High quality tools make stenciling easy, fast and most importantly render beautifully clean results. Do not waste your time and money on cheap applicators. See application recommendations below.
This high-density foam roller is great for stenciling. It is much faster than stenciling and much easier to control and set up than spraying. Our GO-TO tool for painting walls, floors, and other flat smooth surfaces with our mylar stencils.
This brush has a 4-inch wide roller and a 10-inch long handle. The high-density foam roller allows more precise control of the amount of paint on the roller and which allows effective stenclling with minimal bleed.
Using our High-Density foam paint roller is one of the fastest ways to stencil. it is much faster than brushing much like rolling paint on the wall is much faster than using a brush.
How to Stencil with a high-density paint roller
- Place the stencil on the surface, We recommend using Stencil Ease repositionable adhesive spray to both hold the stencil in place and to keep it secure against the painted surface.
- Pour a small amount of prepared paint onto a paint tray. Load the rollers that the paint is evenly distributed around the entire roller.
- Now unload most of the paint on the dry part of the paint tray or on a screen. The idea is to remove the paint so no drops are liquid will be forced from the roller when painting.
THE TEST: if you push into the roller with a pencil or finger no paint pools in the depression. - Now roll the paint on the stencil openings with light pressure.
- Repeat process 2 and 3 until you have the coverage and color desired.
- PRO Tip Like normal painting a brush can be a useful tool to apply small amounts of paint in small tight spaces. Use a stencil brush to fill in tight corners and small openings on the stencil as needed.
These are premium single headed stencil brushes. With stiff china bristles, packed tightly. These brushes are perfect for either the pouncing or the swirling strokes most effective for stenciling. Suitable for both oil and water based paints these brushes are offered in a range of sizes to provide optimal precision and speed.
The 12 Spotter Hand-held wand is a back saver for those doing large spray jobs on the ground. Great for parking lots and sports Fields.
WORKS ONLY FOR SPRAY CANS DESIGNED TO SPRAY DOWNWARD SO WILL NOT WORK ON ALL AEROSOL SPRAY CANS. This is a Sherwin Williams product and works great with their cans with downward spray.
The spraying tool is constructed of durable, rugged plastic and lightweight steel with a comfortable pistol grip for easy handling and marking. Eliminate the annoyance of paint or chalk on your fingers!
Easy to use and affordable, our rollers and ink pads come in several sizes and can
be used with Rolmark and efi inks.
• Rollers available in 1.5” (38 mm), 3” (76 mm).
• Inexpensive stenciling system
• Use Rolmark Ink on porous and non-porous surfaces
• Can also be used with efi inks
• Units sold separately
Choose 2 High density foam roller with 11 handle or the replacement roller.
This is the perfect product to roll apply paint to signs stencils. Espeically good for lettering and focusing on smaller areas.
These are premium single headed stencil brushes. With stiff china bristles, packed tightly. These brushes are perfect for either the pouncing or the swirling strokes most effective for stenciling. Suitable for both oil and water based paints these brushes are offered in a range of sizes to provide optimal precision and speed.
This artist quality, single head brush is perfect for stenciling. Useable with acrylic or oil-based paints, its tightly packed, stiff china bristles are designed for either the pouncing or the swirling strokes most effective for stenciling.
These brushes are offered in a range of sizes to provide optimal precision and speed. The larger ones will paint a large area faster, while the smaller ones will allow you to apply the highlights just where you want them. These brushes can be cleaned with soap and water or solvents depending on the type of paint used. We do recommend having a different brush for each paint color for each project.
KRYLON Snap & Spray
Transforms any spray can into a spray gun.
- Eliminates finger fatigue
- Improves accuracy and control
- Snaps on quick and easy
Valve-Action markers deliver a measured supply of ink to the tip for consistent, permanent marks. The barrel resists ink dry-out even if the cap is left off. The GP-X marker is made for hard to mark surfaces. It makes a bold, opaque, permanent mark on almost any surface, including metal, wood, plastic and glass. Fast drying, permanent ink that wont chip. Weather and fade resistant. Vibrant colors YELLOW and WHITE show up on hard to mark surfaces like rusty pipes, construction materials, tools, equipment and more. GP-X markers can be used to outline stencils and stencil templates before marking, paint and cutting. For the right project, GP-X markers can be used to mark the blank stencil material available in rolls and sheets.
One shot ink cartridge refills in 7 colors.
All ink cartridges contain 125 ml (4.23 ounces)
New Oneshot® Stencil ink roller marking system is ideal for any letter, number or custom stencil marking solution. All you have to do is attach the ink cartridge to the roller head, pump the trigger and you have a neat and efficient marking system.
No-mess, durable ink cartridge is fully disposable · All ink colors meet government ink specifications TT-I-1795A and CID A-A-208 Type 4 · Seven highly visible colors meet CONEG and SARA standards · For indoor and outdoor use · Opaque pigments will not fade when exposed to ultraviolet light · Can be used on all surfaces INCLUDING steel, wood, glass, plastic, metal drums, containers and more. (Note: Some 2-part epoxy paints may not allow inks to cure properly.) · Not intended for decorative stenciling or general craft projects.
In order to use the ink cartridges below, you will need to purchase the Oneshot Ink Roller System
The following ink colors may be purchased separately:
Black, White, Red, Yellow, Green, Orange, Blue
Each ink cartridge comes packed in a zip lock bag for easy handling and storage. If you will be using more than one color of ink we highly suggest buying a replacement roller for each color.
NOTE: INK CARTRIDGES ITEMS CAN ONLY SHIP VIA GROUND SERVICE TO THE LOWER 48 STATES. SHIPPING TO AK AND HI NOT AVAILABLE. CANNOT BE EXPEDITED.
The perfect paint tray for stenciling. Rib design helps to control the amount of paint on the roller to eliminate paint bleed. For use with paint rollers up to 6 inches in length.
Works with our 4-inch paint roller. The perfect application method for using 10 mil mylar on smooth surfaces.
The tray is an 8 x 12 clear; reusable, solvent-resistant paint tray.
The Marsh Fountain Brush ensures solid stencil coverage
and strong clear marks. Great for uneven surfaces, such as
crates, or concrete
• No-mess operation – ink refill is at the handle end of the brush
• Extend product life with replaceable brush tips
• Use brushes for porous and non-porous applications with the appropriate ink
• Includes polypropylene cap to protect bristles
• Use with K or Rolmark ink
Rolmark stencil ink is waterproof, permanent, and fast-drying on most surfaces; marks on porous or non-porous surface.
- Sold in (10 quart containers)
