Servo Kit 180° Brick-compatible
By A Mystery Man Writer
Description
PRODUCT DETAILSDescriptionServo Kit 180°/360° is a 9g servo with LEGO compatible fixed bracket.There are 180 ° or 360 ° specifications.The independent design of the fixed bracket can be easily disassembled, and the product is completely designed according to the LEGO standard unit,so that you can easily combine with LEGO series products, play unlimited creativity.The rudder plate is redesigned, it can be directly connected with LEGO parts. No matter 180 ° or 360 ° servo, it is very easy for beginners to use.Even if you don't know how to program, you can easily drive it with UIFlow.There is no need to use a dedicated servo-drive board with feedback control and a complicated gearbox. Any common pwm driver or a micro controller can easily control this servo. Compared to driving a stepper motor, a servo is much simpler to use. You can use it to do interesting small projects requiring angular movement and/or control.If you feel that the cable is not long enough, you can purchase the servo extension cable to extend it. The yellow wire is for the control signal, brown is for the ground, and the red wire is for the Vcc (voltage).180° servo can only control angle.360° servo can't control the angle, but you can adjust the speed and direction by controlling PWM.When using the servo, pay attention to the power supply current and voltage to prevent burnout.Product FeaturesMicro servo systemLEGO compatibleEasy to controlSupport for Arduino、UIFlowInclude2x SG90 Servo 180° or 360° optional2x GROVE2SERVO adapter2x Elastic2x Fixed base of servo2x Special steering wheel2x Axle connector4x Connector peg with friction1x Frame 5x7-module2x Servo accessories package2x M2*4mm self tapping screw2x Extension wire 30CM(only 180° servo contains)SpecificationResourcesParameterGear materialMetal motor teeth, plastic gearboxPWM50Hz/0.5~2.5MSServo weight9gLocked rotor current750mANo-load current60mATorque1.6kg•cm/4.8V;1.8kg•cm/6.0V180° Servo speed0.1sec/60°/4.8V;0.09sec/60°/6.0vdead zone8μmSpline20TeethVoltage4.8~6.0VSpline20TeethCable length3cmNet weight44gGross weight49gProduct Size40* 12 *36mmPackage Size73* 45 *23mmLEARN AND DOCUMENTSDOCUMENTS 2 Servos, 1 Grove Port 2 Servos, 1 Grove Port Control two servos using only one grove port on M5Stack products. M5Stack Christmas Santa detector M5Stack Christmas Santa detector Do you want to know when Santa Claus arrives without scaring the reindeer? It also works with the Wise Men! M5.A.R.S Quad M5.A.R.S Quad S.M.A.R.S Quad using M5Stack electronic components.
Open-source modular toolkits for IoT devices based on ESP32-updated version of ESP8266. With stackable modules, user-friendly IDE, enabling rapid and high-quality prototyping, STEM education, engineering and mechanical use.
PRODUCT DETAILSDescription Servo Kit 180°/360° is a 9g servo with LEGO compatible fixed bracket.There are 180 ° or 360 ° specifications.The independent design of the fixed bracket can be easily disassembled, and the product is completely designed according to the LEGO standard unit,so that you can easily combine with LEGO series products, play unlimited creativity.The rudder plate is redesigned, it can be directly connected with LEGO parts. No matter 180 ° or 360 ° servo, it is very easy for beginners to use.Even if you don't know how to program, you can easily drive it with UIFlow.There is no need to use a dedicated servo-drive board with feedback control and a complicated gearbox. Any common pwm driver or a micro controller can easily control this servo. Compared to driving a stepper motor, a servo is much simpler to use. You can use it to do interesting small projects requiring angular movement and/or control.If you feel that the cable is not long enough, you can purchase the servo extension cable to extend it. The yellow wire is for the control signal, brown is for the ground, and the red wire is for the Vcc (voltage).180° servo can only control angle.360° servo can't control the angle, but you can adjust the speed and direction by controlling PWM.When using the servo, pay attention to the power supply current and voltage to prevent burnout.Product Features Micro servo system LEGO compatible Easy to control Support for Arduino、UIFlow Include 2x SG90 Servo 180° or 360° optional 2x GROVE2SERVO adapter 2x Elastic 2x Fixed base of servo 2x Special steering wheel 2x Axle connector 4x Connector peg with friction 1x Frame 5x7-module 2x Servo accessories package 2x M2*4mm self tapping screw 2x Extension wire 30CM(only 180° servo contains) Specification Resources Parameter Gear material Metal motor teeth, plastic gearbox PWM 50Hz/0.5~2.5MS Servo weight 9g Locked rotor current 750mA No-load current 60mA Torque 1.6kg•cm/4.8V;1.8kg•cm/6.0V 180° Servo speed 0.1sec/60°/4.8V;0.09sec/60°/6.0v dead zone 8μm Spline 20Teeth Voltage 4.8~6.0V Spline 20Teeth Cable length 3cm Net weight 44g Gross weight 49g Product Size 40* 12 *36mm Package Size 73* 45 *23mm LEARN AND DOCUMENTSDOCUMENTS 2 Servos, 1 Grove Port 2 Servos, 1 Grove Port Control two servos using only one grove port on M5Stack products. M5Stack Christmas Santa detector M5Stack Christmas Santa detector Do you want to know when Santa Claus arrives without scaring the reindeer? It also works with the Wise Men! M5.A.R.S Quad M5.A.R.S Quad S.M.A.R.S Quad using M5Stack electronic components.
Open-source modular toolkits for IoT devices based on ESP32-updated version of ESP8266. With stackable modules, user-friendly IDE, enabling rapid and high-quality prototyping, STEM education, engineering and mechanical use.
PRODUCT DETAILSDescription Servo Kit 180°/360° is a 9g servo with LEGO compatible fixed bracket.There are 180 ° or 360 ° specifications.The independent design of the fixed bracket can be easily disassembled, and the product is completely designed according to the LEGO standard unit,so that you can easily combine with LEGO series products, play unlimited creativity.The rudder plate is redesigned, it can be directly connected with LEGO parts. No matter 180 ° or 360 ° servo, it is very easy for beginners to use.Even if you don't know how to program, you can easily drive it with UIFlow.There is no need to use a dedicated servo-drive board with feedback control and a complicated gearbox. Any common pwm driver or a micro controller can easily control this servo. Compared to driving a stepper motor, a servo is much simpler to use. You can use it to do interesting small projects requiring angular movement and/or control.If you feel that the cable is not long enough, you can purchase the servo extension cable to extend it. The yellow wire is for the control signal, brown is for the ground, and the red wire is for the Vcc (voltage).180° servo can only control angle.360° servo can't control the angle, but you can adjust the speed and direction by controlling PWM.When using the servo, pay attention to the power supply current and voltage to prevent burnout.Product Features Micro servo system LEGO compatible Easy to control Support for Arduino、UIFlow Include 2x SG90 Servo 180° or 360° optional 2x GROVE2SERVO adapter 2x Elastic 2x Fixed base of servo 2x Special steering wheel 2x Axle connector 4x Connector peg with friction 1x Frame 5x7-module 2x Servo accessories package 2x M2*4mm self tapping screw 2x Extension wire 30CM(only 180° servo contains) Specification Resources Parameter Gear material Metal motor teeth, plastic gearbox PWM 50Hz/0.5~2.5MS Servo weight 9g Locked rotor current 750mA No-load current 60mA Torque 1.6kg•cm/4.8V;1.8kg•cm/6.0V 180° Servo speed 0.1sec/60°/4.8V;0.09sec/60°/6.0v dead zone 8μm Spline 20Teeth Voltage 4.8~6.0V Spline 20Teeth Cable length 3cm Net weight 44g Gross weight 49g Product Size 40* 12 *36mm Package Size 73* 45 *23mm LEARN AND DOCUMENTSDOCUMENTS 2 Servos, 1 Grove Port 2 Servos, 1 Grove Port Control two servos using only one grove port on M5Stack products. M5Stack Christmas Santa detector M5Stack Christmas Santa detector Do you want to know when Santa Claus arrives without scaring the reindeer? It also works with the Wise Men! M5.A.R.S Quad M5.A.R.S Quad S.M.A.R.S Quad using M5Stack electronic components.
GeekServo Building Brick 180° Rotation Block Servo
LEGO® Compatible Continuous Rotation Servo
Brick Compatible 270 Degree Servo – Brown Dog Gadgets
Add a Servo to your next programable brick project with this mini Continuous Rotation 360 degree servo!, This handy micro servo is designed to work in
Brick Compatible Continuous Rotation 360 Degree Servo
Add a servo to your next programable project with this mini 270 degree servo!, This handy micro servo is designed to work in any building brick
Brick Compatible 270 Degree Servo
Using high-quality servos, using high-quality brush materials. Practicality, durability, and longevity, far beyond the 9g small steering gear. Strong
4Pcs 270° Gray Geek Servo with Wire for Lego/Micro:bit/Ardui/Raspberry Pi Smart Robot Car
Geekservo Motor (compatible with LEGO) - RobotShop
Using high-quality servos, using high-quality brush materials. Practicality, durability, and longevity, far beyond the 9g small steering gear. Strong
4Pcs 270° Gray Geek Servo with Wire for Lego/Micro:bit/Ardui/Raspberry Pi Smart Robot Car
GeekServo Building Brick 180° Rotation Block Servo
Motor power pack can replace LEGO compatible light gray housing M motor (8883 / 58120) L motor (88003 / 99499) XL motor (8882 / 58121) Servo motor (88004 / 99498) Monster motor (5292) train motor (87574)
Haiboxing 18030 5-wire servo 9g New Style 5cm wire for HBX 1/18 RC Buggy 18856
Motor power pack can replace LEGO compatible light gray housing M motor (8883 / 58120) L motor (88003 / 99499) XL motor (8882 / 58121) Servo motor (88004 / 99498) Monster motor (5292) train motor (87574)
Budget Analog Servo .15/8kg-cm @6v Standard Size, Metal Gear – Savox USA
Haiboxing 18030 5-wire servo 9g New Style 5cm wire for HBX 1/18 RC Buggy 18856
from
per adult (price varies by group size)
