3M™ Automix SMC/Fiberglass Panel Adhesive 08219
By A Mystery Man Writer
Description
The 3M Automix SMC / Fiberglass Panel Adhesive is perfect for bonding sheet metal compound (SMC) and fiberglass reinforced polyester (FRP) body panels. It efficiently bonds SMC and FRP panels to each other and is also effective for bonding metal to metal too. Remember to prime the metal with a two-part epoxy primer.The 3M Automix SMC / Fiberglass Panel Adhesive features very good resistance to sag and can be cured at room temperature. It will match the Original Equipment Manufacturer (OEM) finish. The product can be used with applicators like the PN 08571 and PN 08117 manual and the PN 09930 pneumatic applicators. This adhesive comes with a 200 ml Dual-Syringe Cartridge System and based on an approximate 70°F environment; it takes about 30 minutes to apply and 24 hours to cure. Key Features of the 3M Automix SMC / Fiberglass Panel Adhesive: Perfect for bonding SMC to FRP or metal panels Can be used for bonding metal to metal Very good sag resistance Can be cured at room temperature Provides OEM finish Takes approximately 30 minutes to apply and 24 hours to cure This item can only ship by ground within the Continental US. Next Day or 2nd Day, AK & HI, & International delivery not available.
The 3M Automix SMC / Fiberglass Panel Adhesive is perfect for bonding sheet metal compound (SMC) and fiberglass reinforced polyester (FRP) body panels. It efficiently bonds SMC and FRP panels to each other and is also effective for bonding metal to metal too. Remember to prime the metal with a two-part epoxy primer.The 3M Automix SMC / Fiberglass Panel Adhesive features very good resistance to sag and can be cured at room temperature. It will match the Original Equipment Manufacturer (OEM) finish. The product can be used with applicators like the PN 08571 and PN 08117 manual and the PN 09930 pneumatic applicators. This adhesive comes with a 200 ml Dual-Syringe Cartridge System and based on an approximate 70°F environment; it takes about 30 minutes to apply and 24 hours to cure. Key Features of the 3M Automix SMC / Fiberglass Panel Adhesive: Perfect for bonding SMC to FRP or metal panels Can be used for bonding metal to metal Very good sag resistance Can be cured at room temperature Provides OEM finish Takes approximately 30 minutes to apply and 24 hours to cure This item can only ship by ground within the Continental US. Next Day or 2nd Day, AK & HI, & International delivery not available.
The 3M Automix SMC / Fiberglass Panel Adhesive is perfect for bonding sheet metal compound (SMC) and fiberglass reinforced polyester (FRP) body panels. It efficiently bonds SMC and FRP panels to each other and is also effective for bonding metal to metal too. Remember to prime the metal with a two-part epoxy primer.The 3M Automix SMC / Fiberglass Panel Adhesive features very good resistance to sag and can be cured at room temperature. It will match the Original Equipment Manufacturer (OEM) finish. The product can be used with applicators like the PN 08571 and PN 08117 manual and the PN 09930 pneumatic applicators. This adhesive comes with a 200 ml Dual-Syringe Cartridge System and based on an approximate 70°F environment; it takes about 30 minutes to apply and 24 hours to cure. Key Features of the 3M Automix SMC / Fiberglass Panel Adhesive: Perfect for bonding SMC to FRP or metal panels Can be used for bonding metal to metal Very good sag resistance Can be cured at room temperature Provides OEM finish Takes approximately 30 minutes to apply and 24 hours to cure This item can only ship by ground within the Continental US. Next Day or 2nd Day, AK & HI, & International delivery not available.
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://images-na.ssl-images-amazon.com/images/I/71s4291X4UL._AC_UL600_SR600,600_.jpg)
3M SMC/Fiberglass Repair Adhesive-35, 08219, Green
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://m.media-amazon.com/images/I/31qja5PreQL._AC_UF894,1000_QL80_.jpg)
3m 3MA-8219 Automix Smc/fiberglass Panel Adhesive
Two-part urethane or two-part epoxy adhesives effectively bond rigid plastic Commonly used to bond backup strips to SMC and FRP (traditional
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://m.media-amazon.com/images/I/71xU5OieEoL.jpg)
3M SMC/Fiberglass Repair Adhesive-35, 08219, Green, 200 mL Cartridge
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://m.media-amazon.com/images/I/41L+82U0mjL._AC_.jpg)
3M SMC/Fiberglass Repair Adhesive-1, 08243, Black, 200
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://s3.amazonaws.com/cdn.collisionservices.com/images/prods/thumb/1700051.jpg)
3M™ Automotive Supplies for Body Shops - Collision Services
A high-performance two component urethane adhesive with excellent sag resistance.
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://i.ebayimg.com/images/g/JCAAAOSwjjxj9m4V/s-l400.jpg)
200mL 3M Body Panel Bonding Automix SMC Fiberglass Adhesive 08219 (3 Pack)
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://s3.amazonaws.com/cdn.ideaautorepair.com/images/prods/thumb/3M-06837-dust-control-spray.jpg)
3M™ Automotive Products - I/D/E/A Auto Repair
Two-part urethane adhesive used to adhere backup strips and patches to SMC and FRP (traditional fiberglass). This is a faster version of PN08227. Has automatic mixing and metering. Use with Premium Manual Applicator 200ml, 08117.
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://www.stockcarsteel.com/site/product-images/MMM-08272_media01.jpg)
3M - 08272 - SMC/Fiberglass Repair Adhesive-10, 400 ml
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://s3.amazonaws.com/cdn.ideaautorepair.com/images/prods/thumb/1802316.jpg)
3M Adhesives
![3M™ Automix SMC/Fiberglass Panel Adhesive 08219](https://s3.amazonaws.com/cdn.ideaautorepair.com/images/prods/thumb/1701144.jpg)
3M™ Automotive Products - I/D/E/A Auto Repair
from
per adult (price varies by group size)