Home
Pressure Pot For Epoxy Resin Casting

Resin Casting – Pressure Pot 20Ltr

By A Mystery Man Writer

Description
Resin Moulding Casting Tank/Pot 20 Litre Internal Dimensions Height = 39cm Diameter = 32cm. 60Psi maximum working pressure. Casting under pressure is the best way to make high quality resin castings. This is especially true with difficult recesses and complex moulds. Pressure casting compresses air bubbles to sizes hard to detected by the human eye creating a virtually bubble free casting. Simply cast your part in your mould and then insert your mould into the pressure pot. Apply positive air pressure from any regulated compressor and leave to cure under pressure. These tanks are modified for casting only and can not be used for paint. All unused outlets are permanently capped with 150psi 316 stainless steel caps. Important points regarding pressure tanks: The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a working pressure of 60 Psi or below. Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Resin Casting – Pressure Pot 20Ltr
Resin Casting Accessories – Turners Warehouse
Resin Casting – Pressure Pot 20Ltr
TCP Global 5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing
Resin Casting – Pressure Pot 20Ltr
Pressure Pot for Resin Casting
Resin Casting – Pressure Pot 20Ltr
A Pressure Pot Made for Resin Casting - No Conversion Needed!
Resin Casting – Pressure Pot 20Ltr
5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting — TCP Global
Resin Casting – Pressure Pot 20Ltr
Plastic Syringe – 10ml or 60ml Glassfibre and Resin Supplies Ltd
Resin Casting – Pressure Pot 20Ltr
Top Finish 20lt Resin Casting Pressure Pot – Millin
Resin Casting – Pressure Pot 20Ltr
Gas Regulator in Wexford
Resin Casting – Pressure Pot 20Ltr
Gas Regulator in Wexford
When using resin to cast and encapsulate, it's crucial that you remove the air bubbles that inevitably creep into your resin as you pour. That's where the California Air Tools 2.5-gallon pressure pot becomes essential to ensuring top-quality results. Just pour the resin into your mold, set it inside, seal the lid and connect an air compressor (sold separately) with the included standard quick coupler.
Resin Casting – Pressure Pot 20Ltr
California Air Tools 2.5 gal. 255c Pressure Pot for Casting
from per adult (price varies by group size)