Resin Casting – Pressure Pot (10L / 20L)
By A Mystery Man Writer
Description
Resin Moulding Casting Tank/Pot Select a Product Below Height Diameter Max Working Pressure Pressure Pot 10L 22cm 26cm 60Psi Pressure Pot 20L 39cm 32cm 60Psi Casting under pressure is the best way to make high quality resin castings. This is especially true with difficult recesses and complex moulds. Pressure casting compresses air bubbles to sizes hard to detected by the human eye creating a virtually bubble free casting. Simply cast your part in your mould and then insert your mould into the pressure pot. Apply positive air pressure from any regulated compressor and leave to cure under pressure. These tanks are modified for casting only and can not be used for paint. All unused outlets are permanently capped with 150psi 316 stainless steel caps. Important points regarding pressure tanks: The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a working pressure of 60 Psi or below. Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Pressure Pot for Resin Casting Perfect For DIY Epoxy Projects
EpoxAcast™ 690 – Optically Clear Casting Epoxy
C.A. Technologies Resin Casting 2.5 Gallon Pressure Tank – Finish Systems
C.A. Technologies Resin Casting 10 Gallon Pressure Tank – Finish Systems
VEVOR Spray Tank 10L/2.5gal Air Pressure Pot for Resin Casting, Metal Rack & Leak Repair Sealant for Industry Home Decor Architecture Construction Automotive Painting, 70PSI Max, Black : Tools
Ancillary Tools, Kits and Equipment
The Pressure Pot is designed for assuring bubble free and air-trap free castings
Pressure Pot for Resin Casting
Top Finish 20lt Resin Casting Pressure Pot – Millin
Woodworking Glassfibre and Resin Supplies Ltd
C.A. Technologies Resin Casting 10 Gallon Pressure Tank – Finish Systems
The California Air Tools 1810C 10-gal. Casting Pressure Pot features a Teflon coated steel tank for easy clean up, rubber feet for stability, an output regulator, on/off ball valve, pressure relief valve, large lid gasket and clamps for tight fit with no air leaks. Maximum pressure is 80 PSI and operating pressure is 60 PSI.
California Air Tools 1810c 10 Gallon Casting Pressure Pot
VEVOR Spray Tank 10L/2.5gal Air Pressure Pot for Resin Casting, Metal Rack & Leak Repair Sealant for Industry Home Decor Architecture Construction Automotive Painting, 70PSI Max, Black : Tools
Q1® PREMIUM – Yellow Masking Tape 2″ (48MM X 50M)
TCP Global 5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing
from
per adult (price varies by group size)
