Premium Matte Metallic Satin Pearl Silver Vinyl Wrap Sticker Bubble Free
By A Mystery Man Writer
Description
This Car Accessories item by TMHTRADING has 11 favorites from shoppers. Ships from Rowland Heights, CA. Listed on Oct 3, 2023
Item Specification: Thickness of film (C=10 micron): 15C±0.5C Thickness of film with release liner: 31C±0.5C Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition) Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition) Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany Storing period: 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place Indoor life: 4 years when followed rules of application and use Outdoor life: 3 years when followed rules of application and use Application: from +10°С to +20°С, usage from -30°С to +30°С Dimensional stability: shrinkage less than 5% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04 Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5 Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 5h condensation at (50±2.5)℃ BPT, Exposure duration: 52h Description: Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low - medium tack self adhesive (Easy to Reposition) Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners) Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use 3M primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter.
Item Specification: Thickness of film (C=10 micron): 15C±0.5C Thickness of film with release liner: 31C±0.5C Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition) Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition) Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany Storing period: 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place Indoor life: 4 years when followed rules of application and use Outdoor life: 3 years when followed rules of application and use Application: from +10°С to +20°С, usage from -30°С to +30°С Dimensional stability: shrinkage less than 5% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04 Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5 Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 5h condensation at (50±2.5)℃ BPT, Exposure duration: 52h Description: Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low - medium tack self adhesive (Easy to Reposition) Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners) Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use 3M primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter.
Silver Heavy Matte Metallic Vinyl Car Wrap with Air bubble free Like 3M quality Initial Low
Vvivid Vinyl Wrap
Iron on Monogram, Iron on Decal, Iron on Vinyl, 72 Iron on Vinyl Colors
Silver SATIN CHROME Vinyl Car Wrap Film With Air Bubble Free Satin Silver Chrome Covering Styling Graphics 1.52x20m Roll 5X67ft From Top_carstyling, $289.45
3m Car Vinyl Wrap
* Water resistant and weather proof. * Flexible and Stretchable for concave area. * Low cost to change the look of your vehicles. * Easy installation
60x300 Premium Matte Metallic Satin Pearl Silver Vinyl Wrap Sticker Decal Bubble Air Release
Premium Matte Metallic Satin Pearl DARK GREEN Vinyl Wrap Full Entire Car Air Bubble Free
Premium Matte Metallic Satin Pearl Silver Vinyl Wrap Sticker Bubble Free
4x8 (10cmx20cm) Sample Matte Metallic Satin Pearl Dark Green Vinyl Wrap Sticker Sheet Film DIY Decal Car Auto Vehicle Motorcycle Air Release Bubble Free Self Adhesive Peel and Stick Free Tool
JDMBESTBOY Free Tool Kit New Premium Matte Metallic Satin Pearl Champagne Gold Car Vinyl Vehicle Wrap Automotive Sticker Decal Wrapping Film with Bubble Free Air Release 4x8 (10cmx20cm) Sample : Automotive
Premium Matte Metallic Satin Pearl LIGHT BLUE Vinyl Wrap Full Entire Car Air Bubble Free
Vinyl Wrap. Sticker Bomb. Automotive Vinyl Wrap Film. Type of film: Hybrid vinyl film with air channels(Designed for vehicle exterior with prefect
Matte Metallic Satin Pearl Rose Gold Vinyl Wrap Sticker Bubble Free Film Decal
60x240 Premium Matte Metallic Satin Pearl Pink Vinyl Wrap Sticker Decal Bubble Air Release
from
per adult (price varies by group size)
