Polyvine Acrylic Enamel Paint

By A Mystery Man Writer

Description

Paint your models, wood, metal and more with Studio Depot's selection of Polyvine Acrylic Enamel Paints. Suitable for indoor and outdoor use and easy to apply.
These acrylic enamel paints have been specially developed for easy use as they are non-hazardous and low odour. They are suitable for interior and exterior use, in fact, anywhere a traditional solvent based enamel was used. These tough, durable enamels are available in a large range of intermixable colours which can be used on plastic, metal, wood, glass, ceramic, card and porcelain. Safe for children's toys. Suitable for brush or airbrush application. Polyvine enamels are water based as they are developed specially to be non-hazardous and low odour unlike many of the more traditional solvent based enamels. They should be left to fully dry and set by natural air drying only, and should not be baked or fired. Ideal for Plastic Metal Wood Glass Canvas Interior or exterior use Unique qualities Drying time: see datasheet Recoat time: see datasheet Coverage: as required Preparation Surface must be clean, dry and free from dust, dirt and contamination. Application Mix well. Try a test area first. Apply the first coat and allow to fully air dry. Two thin coats are better than one thick coat. All colours are intermixable. Storage Protect from extremes of temperature during storage and application Health, safety and the environment Non-hazardous. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Wash brushes in warm soapy water. Do not empty into drains or watercourses. Please note that product images are only a representation of colour and should be used as a guide only. Colours when applied will vary according to the material they are used on.