Sublimation or Laser Engraving Mini Shot Glass Tumbler with lid and – ACC Sublimation Blanks & Designs
By A Mystery Man Writer
Description
Mini "shot glass" tumbler is sublimation ready (all colors) and sized at approximately 2-3 oz. Includes lid and straw. (2oz capacity when lid is on, 3oz capacity without lid) Tumblers can also be engraved in a laser! Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately, and
Mini shot glass tumbler is sublimation ready (all colors) and sized at approximately 2-3 oz. Includes lid and straw. (2oz capacity when lid is on, 3oz capacity without lid) Tumblers can also be engraved in a laser! Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately, and accessories such as rubber bottoms and straw cleaning brushes are also available in a separate listing. ***Directions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations. Apply sublimation transfer on the surface of the tumbler using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler. Pulling the tape/transfer as tight as possible with no air pockets. If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides. *Convection Oven* (Equipment settings will vary!) Apply shrink wrap using a heat gun to shrink it tight to the tumbler. Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway. **If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt! Remove from oven and immediately remove shrink wrap and transfer. TUMBLER WILL BE HOT!! No sealant is necessary on sublimation tumblers. *Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed.
Mini shot glass tumbler is sublimation ready (all colors) and sized at approximately 2-3 oz. Includes lid and straw. (2oz capacity when lid is on, 3oz capacity without lid) Tumblers can also be engraved in a laser! Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately, and accessories such as rubber bottoms and straw cleaning brushes are also available in a separate listing. ***Directions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations. Apply sublimation transfer on the surface of the tumbler using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler. Pulling the tape/transfer as tight as possible with no air pockets. If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides. *Convection Oven* (Equipment settings will vary!) Apply shrink wrap using a heat gun to shrink it tight to the tumbler. Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway. **If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt! Remove from oven and immediately remove shrink wrap and transfer. TUMBLER WILL BE HOT!! No sealant is necessary on sublimation tumblers. *Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed.
Sublimation Tumblers – ACC Sublimation Blanks & Designs
Sublimation Tumblers – ACC Sublimation Blanks & Designs
Collections – ACC Sublimation Blanks & Designs
ACC Sublimation Blanks & Designs
Sublimation Tumblers – ACC Sublimation Blanks & Designs
🥤 3 OZ SHOT GLASSES BULK SET: Surprising glow in the dark tumbler shot glass(12 pieces)-[white to green]. FECBK glow in the dark sublimation tumblers
FECBK 3oz Mini Tumbler Shot Glass with Straw and Lid 12 Pcs Sublimation Shot Glasses Tumblers Blank Stainless Steel Cute Shot Glasses Set for Party
Sublimation Tumblers – ACC Sublimation Blanks & Designs
2oz mini tumbler shot glass blank sublimation glow in dark 2oz
Capacity: 20Oz; Size: 20.8 x 7.3 x 6.5cm (8.2 x 2.8 x 2.6) 18/8 304 stainless steel: Travel mugs are made of 304 stainless steel. Electro polished
25PCS Blank Water Bottles for Engraving 20oz Laser Engraving Blank Skinny Tumbler Stainless Steel Insulated Water Bottle Double Wall Vacuum Travel Cup
Sublimation or Laser Engraving Mini Shot Glass Tumbler with lid
ACC Sublimation Blanks & Designs
ACC Sublimation Blanks & Designs
2oz Sublimation Shot Glass/ Mini Tumbler With Lid and Straw
ACC Sublimation Blanks & Designs
Custom Laser Engraved Skinny Tumbler – Mae Designs
from
per adult (price varies by group size)