Epoxy Resin 2:1 Kit– Fiberglass and Resin
This epoxy kit is a two-part resin system. It is clear, tough and high gloss. It comes with Part A which is the epoxy resin and Part B that is the hardener. The hardeners come in fast, medium and slow to best fit the ambient temperature and desired pot life.
Pot life at 77°F
Fast: 12-18 min.
Medium: 20-30 min.
Slow: 45-60 min.
Uses-
-Composite parts
-High performance and light weight parts
-Surfboard repair and manufacturing
-Adhesive for bonding fiberglass, wood, and metal
-Wood boat construction
***NOT compatible with chopped strand mat. Compatible with fiberglass fabric/cloth, carbon fiber and Kevlar.
Application-
-For best results, the work area and resin should be between 75°F and 80°F.
-Wear proper safety clothing including gloves and googles.
-Prep the surface before mixing resin. It should be dry and free of contaminates such as dust and oils.
-Mix and measure the resin and hardener accurately. Thoroughly mix for proper curing and performance. This kit is mixed 2:1 by volume.
-Mix the resin and hardener for 3-5 minutes. Scrape the sides and bottom of the container while mixing.
-Can be applied using a fiberglass roller, brush, spreader or squeegee
Available Sizes-
1.5 Pint Kit, 1.5 Quart Kit, .75 Gallon Kit, 1.5 Gallon Kit, 7.5 Gallon Kit
Handling and Storage-
Store closed containers in a cool, dry area that is away from sunlight and heat sources. It should be stored at temperatures below 75°F.This epoxy kit is a two-part resin system. It is clear, tough and high gloss. It comes with Part A which is the epoxy resin and Part B that is the hardener. The hardeners come in fast, medium and slow to best fit the ambient temperature and desired pot life. Pot life at 77°F Fast: 12-18 min. Medium: 20-30 min. Slow: 45-60 min. Uses- -Composite parts -High performance and light weight parts -Surfboard repair and manufacturing -Adhesive for bonding fiberglass, wood, and metal -Wood boat construction ***NOT compatible with chopped strand mat. Compatible with fiberglass fabric/cloth, carbon fiber and Kevlar. Application- -For best results, the work area and resin should be between 75°F and 80°F. -Wear proper safety clothing including gloves and googles. -Prep the surface before mixing resin. It should be dry and free of contaminates such as dust and oils. -Mix and measure the resin and hardener accurately. Thoroughly mix for proper curing and performance. This kit is mixed 2:1 by volume. -Mix the resin and hardener for 3-5 minutes. Scrape the sides and bottom of the container while mixing. -Can be applied using a fiberglass roller, brush, spreader or squeegee Available Sizes- 1.5 Pint Kit, 1.5 Quart Kit, .75 Gallon Kit, 1.5 Gallon Kit, 7.5 Gallon Kit Handling and Storage- Store closed containers in a cool, dry area that is away from sunlight and heat sources. It should be stored at temperatures below 75°F.
