Solarez Bone Dry Clear UV Cure Resin Tack-Free Fly Tying Coating - basin + bend

Cures Bone Dry to a clear, hard, non-tacky and glossy finish in under 10 seconds. Great for building up glass-like bodies on small nymphs and perdigons. The ultra thin formula excels at covering synthetic materials for extra durability.

This is a 0.5 oz bottle (14 grams) with applicator brush, compared to other products offering only 4 grams of actual product.

• No mixing necessary.
• Made in the USA.
• No tacky finish that needs to be wiped off with alcohol like other products.
• Non-yellowing.
• Ultra-low viscosity.
• UV-Cure.
• Glossy, hard clear finish.
  
  

Is your Bone Dry Crystalized or Chunky?
The “ULTRA-THIN” BONE-DRY formula is the best UV top coat available, but it has one quirk: it crystallizes with prolonged exposure to temperatures below 45°F. This probably will not occur at your tying desk but it might occur in shipping along the way.

If this does occur, it will look like the resin has gone clumpy, like crystallized honey. The remedy; same as honey, pop the entire bottle into a microwave oven and nuke it for about 10 seconds. Depending on your microwave, it might take two or three sessions to bring it back to its liquid state again. It might need to get to a temperature of 125°F – right about where the bottle feels hot but not too hot to hold.

Once this has been achieved, the resin is perfectly good again and can be used and it will stay like this for years. If the resin is exposed again to a temperature of under 45°F for a few hours, it will crystallize again. The same remedy will fix it.